Brands
 
Shopping Cart
0 items
 

Axial SCX10 Aluminum Front & Rear Lower Suspension Links (STA30518/STA30517)

Axial SCX10 Aluminum Front & Rear Lower Suspension Links (STA30518/STA30517)

Axial SCX10 Aluminum Front & Rear Lower Suspension Links STA30518 (requires Axial part AX80005 rod ends and AX80018 Rod End links)

STA30518 replaces the flexing/twisting plastic suspension links with solid CNC Machined Aluminum links



Locate the suspension links (4pcs), M3x16mm set screws (8 pcs), AX80005 straight rod ends (8 pcs), and AX80018 Rod end links (8 pcs)



Thread the M3x16mm set screw into the rod end about half way length of the set screw.  Snap the rod end links into the rod end.  Install the rod end assembly into the suspension link, be sure to use a small drop of blue loc-tite on the threads going into the aluminum suspension links.





Pair up the front links (shorter 98mm links)  to the front of the truck, and the longer links (106mm links) to the rear of the truck



Remove the skid plate screw that holds in the plastic link and replace it with the assembled aluminum links.  It is easier to do one end of the suspension link at a time instead of removing the entire link as then the axle would start moving around during install making it more difficult.  



remove the plast link from the axle side and install the other end of the aluminum suspension link assembly. 



Repeat the same process for the rear suspension links.  Work just one side at a time for ease of install.

Now your SCX10 is complete with solid, non-flexing and precise suspension links.

There are no products to list in this category.